Skip to content

The EmbossMax 5000 automatic metal tag embossing machine is designed for medium- to high-volume tagging needs. A coil of pre-fabricated metal tags is loaded into the system and it’s ready to accept data and start embossing. Tags can be made in batches or individually and are then snapped apart for use.

  • Emboss one or more lines of text, logos, and 2D Data Matrix codes
  • Designed for continuous, jam-free marking of up to 1,000 tags per coil

Fully Automated Embossing

The EmbossMax 5000 uses dot peen technology to emboss metal tags using a carbide marking pin. The tag stock advances automatically after each tag is made. An optional recoiler can recoil the tags for later use.

Data to be marked can be loaded from a file or sent from a host system on your network. Make individual tags as needed via manual data entry or by scanning bar codes on job paperwork. Automatic data checking parameters can be set to prevent data entry errors.

EmbossMax 5000 Automatic Metal Tag Embossing Machine
EmbossMax 5000 Automatic Metal Tag Embossing Machine

EmbossMax 5000 Automatic Metal Tag Embossing Machine

automatic embossing

tags are automatically fed and embossed

blank metal tags in continuous coils

coils of pre-fabricated metal tags

EmbossMax tags

embossed metal tags

EmbossMax 5000 Automatic Metal Tag Embossing Machineautomatic embossingblank metal tags in continuous coilsEmbossMax tags
Video
Tag Options

Pannier manufactures metal tags to your specifications.

Typical Tag Sizes Thickness .008″ to .018″ .203mm to .457mm
Width 7/8″, 2″ or 3″ 22.225mm, 50.8mm, and 76.2mm
Length 1″ to 7″
(in increments of 1/8″)
25.4mm to 177.8mm
(in increments of 3.2mm)
Tag Materials aluminum, steel, electro-galvanized steel, stainless steel
Hole Options pre-fabricated holes or slots for easy attachment with tag clips or wire
Marking Options
  • emboss, deboss, or stamp tags
  • unlimited range of character sizes
  • mark text, logos, and 2D codes in any direction on the tag
Pre-Embossing

Tags can be supplied pre-embossed with information such as your company name, logos, or field names (e.g. Grade, Weight, Customer, etc) for faster tag creation.

Applications

Tagging Products in Harsh Industrial Processes

The raised characters on embossed tags remain legible through processes like shot blasting, pickling, annealing, hot dip galvanizing, painting, and powder coating where any other tag or label would be rendered unreadable. Your product identification remains intact even after years of exposure to outdoor conditions.

412.323.4900

Talk to a product specialist about your marking project.

Back To Top